Product search
Product Categories
General type
Product Introduction
Product details
HANDLING: Motor Bike Seat PU system
| MATERIAL A | MATERIAL B | ||
| P-3300 | I-3360 | ||
| Parameter | Value | Value | Unit |
| Apperance at room temperature | White Milky | Brown transparent | - |
| Melting point | -10℃ | 20℃ | ℃ |
| Solid material melting time | 0-1 | 0-1 | hours |
| Viscosity at 35 °C | 1500 | 300 | mPa·s |
| Density at working temperature | 1.05 | 1.2 | g/cm³ |
| Mixing ratio | 100 | 85-90 | V/m |
| Working temperature | 45 | 40 | ℃ |
| Moulds temperature | 45-55 | ℃ | |
| Demoulding time | 250-300 | second | |
Reaction performance (Cream Time/Thread Time) | 10-12 | second | |
| Free Density | 0.03-0.04 | g/cm³ | |
MECHANICAL PERFORMANCE OF THE FOAM
| Parameter | Value | Unit |
| Density(UNI 10902) | 0.04-0.05 | g/cm³ |
| Hardness(UNI EN ISO 868) | 60-80 | Shore C |
| Elogation at break(UNI EN 12803) | 85 | % |
| Tensile strength at break(UNI 12803) | 100 | MPa |
| Tear Resistance(UNI EN 12771) | 3 | N/mm |
*It is based on test results from samples taken on 10mm plates using Derkim Polyurethane test methods in our laboratories. *It is recommended that our products be stored at room temperature in places that are not exposed to direct sunlight and rain. | ||
Previous：
Low-density type
Next：
Value plus series